Over crank - Mechanical Shearing

FRAME :

The Frame is rigidly constructed from Solid steel plates with safeguards, It's interlocked design provides support to the bed directly on the frame to avoid weak sections at load supports.

HOLD DOWN SYSTEM :

Spring Loaded mechanical Hold Down system are provided to hold the sheet securely to avoid slipping and bowing. The pressure of each hold down unit is ample to securely hold even shorter pieces under one hold down. The increase/decrease of pressure of hold down is adjusted through Cam by adjustable lever and rods.

KNIVES :

Each machine is provided with high quality single segment, (HcHcr) knives for enhanced tool life. The knives blades are four edged.

MECHANICAL BACK GAUGE :

This equipment is provided with Scale to give instantaneous reading of distance between shear and back gauge to avoid errors.

FINGER GUARD :

To avoid accident, Finger Guard is fitted in front of Hold down system for operator's protection without obstructing his view.

LUBRICATION :

All moving parts are provided lubrication by hand operated pump for smooth operation.

STANDARD ACCESSORIES :

Gear & Wheel Guard, Hand operated back Gauge, Manual Lubrication pump, Stroke counter, T-Slot front supporters, front Scale gauge.

OPTIONAL ACCESSORIES :

Automatic Lubrication system, Electric Motor, Starter, V-Belt, Ball Roller or ball transfer, Foundation Bolts, Extension squaring arm etc.

NOTE :

Electrical motor and blades are not under warranty.

MODEL CUTTING CAP. IN (MS) L. x THK. STROKE PER MINUTE TABLE HEIGHT TABLE WIDTH FRONT GAUGE REAR GAUGE MOTOR H.P./K.W. BLADE LENGTH WIDTH X THICK
LxWxH
OVERALL DIMENSION IN MM
L. W. H.
VOS - 1 1270X6 30 800 450 600 750 7.5/5.6 1270X70X20 2200 2000
VOS - 2 1525X6 30 800 450 600 750 7.5/5.6 1525X70X20 2450 2000 2600
VOS - 3 2030X6 30 800 450 600 750 10/7.7 2030X70X20 2960 2000 2600
VOS - 4 2540X6 30 800 450 600 750 10/7.7 2540X70X20 3470 2000 2600
VOS - 5 3125X6 30 800 450 600 750 15/11.2 3125X70X20 4055 2000 2600
VOS - 6 1270X8 25 800 450 600 750 10/7.7 1270X75X20 2200 2000 2600
VOS - 7 1525X8 25 800 450 600 750 10/7.7 1525X75X20 2450 2000 2600
VOS - 8 2030X8 25 800 450 600 750 12.5/9.7 2030X75X20 2960 2000 2600
VOS - 9 2540X8 25 800 450 600 750 15/11.2 2540X75X20 3470 2000 2600
VOS - 10 3125X8 25 800 450 600 750 20/15 3125X75X20 4100 2000 2600
VOS - 11 2030X10 20 800 450 600 750 15/11.2 2030X90X22 3000 2000 2700
VOS - 12 2540X10 20 800 450 600 750 20/15 2540X90X22 3500 2000 2900
VOS - 13 3125X10 20 800 450 600 750 25/18.7 3125X90X22 4200 2000 2900
VOS - 14 2030X13 20 800 450 600 750 20/15 2030X100X25 3000 2000 3000
VOS - 15 2540X13 20 800 450 600 750 25/18.7 2540X100X25 3600 2100 3100
VOS - 16 3125X13 20 800 450 600 750 30/22.5 3125X100X25 4300 2100 3100
All Dimensions are in m.m. Specifications are subject to change Power Supply : 400 / 440 V., 3 Phase, 50 Hz