C Type - Press Brake

HYDRAULIC SYSTEM :

The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes.

This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates.

Pressure relief value is provided to safe guard the system and machine from overload. The Hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.

Electrical And Control Panel :

The electric control panel is located on the left hand side of the machine. If is assembled from the internationally reputed parts for consistent performance, reliability and availability. if needed to be replaced. It is wired cleanly and labelled/ferruled properly as per the international practices to help easily locate and fault and replace components conveniently.

Cyclinder

The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN - 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron)

Table and Slide (RAM)

Table and Slide are made of high grade heavy duty cast iron/steel fabricated and properly seasoned.

They are perfectly aligned, to each other to obtain high accuracy and precession press operation.

DESCRIPTION      VCP VCP-0 VCP-1 VCP-2 VCP-3
CAPACITY TONNE 30 40 60 80 100
CAPACITY MM 90 MM 100 MM 120 MM 160 MM 170 MM
STROKE ADJUSTMENT MM 100 MM 130 MM 150 MM 170 MM 180 MM
RAM ADJUSTMENT MM 38 MM 38 MM 38 MM 38 MM 50 MM
HOLE IN RAM MM 38 MM 38 MM 45 MM 51 MM 63 MM
DISTANCE BED TO RAM UP STROKE MM 330 MM 350 MM 375 MM 405 MM 425 MM
DISTANCE BED TO RAM DOWN STROKE MM 230 MM 220 MM 225 MM 235 MM 245 MM
DEPTH OF THROAT MM 225 MM 225 MM 203 MM 279 MM 305 MM
LENGTH X WIDTH OF BED MM 610 X 405 X 60 MM 610 X 450 X 60 MM 762 X 508 X 65 MM 812 X 558 X 70 MM 915 X 610 X 75 MM
BED PLATE MM 610 X 405 X 35 MM 610 X 450 X 35 MM 762 X 508 X 40 MM 812 X 558 X 40 MM 915 X 610 X 40 MM
HOLE IN BED MM MM 95 MM 110 MM 120 MM 140 MM 150 MM
FLOOR TO TOP OF BED MM 810 MM 810 MM 940 MM 940 MM 940 MM
STROKE PER MINUTE (25 MM) MM / MIN. 55 (Ideal Condition) 75 (Ideal Condition) 70 (Ideal Condition) 75 (Ideal Condition) 72 (Ideal Condition)
APPROCHING SPEED MM / SEC. 36 51 47 52 45
PRESSING SPEED MM / SEC. 5 7 7 9 9
RETURN SPEED MM / SEC. 76 104 85 95 100
OIL TANK MM 190ltr 300ltr 480ltr 620ltr 900ltr
CENTRE TO BACK MM 225 MM 225 MM 254 MM 279 MM 305 MM
MOTOR REQUIRED HP 3 HP 5 HP 7.5 HP 10 HP 15 HP
MOTOR RPM RPM 1440 RPM 1440 RPM 1440 RPM 1440 RPM 1440 RPM